PbxTools PhoneJournal Call Accounting Software

Alcatel 4200 E

You have to do the following settings using your Alcatel programming software (MMC).

If you don't have a cable you'll need to make the wiring directly on the CM board.

Connect X7, X8 : 10 pin BURNDY connector for connecting a pulse metering device (X7) and the MMC PC (X8). The terminals connected to these interfaces must be classified S.E.L.V.

Alcatel OmniPcx Office (OXO)

The default address of the pbx system is 192.168.0.254 and the port for ftp is 30021. You need to set in the PbxMon setup in the remote server address:port the following string: 192.168.0.254:30021. Also you must use user ftp_nmc and password tuxalize.

Alcatel OmniPcx Enterprise and 4400 (OXE)

The default address of the pbx system is 192.168.0.254 and the port for ftp is 21. You need to set in the PbxMon setup in the remote server address:port the following string: 192.168.0.254:21. Also you must use user mtcl and password mtcl.