PbxTools PhoneJournal Call Accounting Software

KX-TD and KX-TA Series (newer)

• go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position.
• Press *#xxxx where xxxx if the password for programming. This is usally 1234 or 0000 or 9999. Please do not contact us if you don't know the password because we can't help you. You should contact the one that had installed your PBX.
• [800] - RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit.
• [801] - choose 0 (skip perforation)
• [802] - incoming on and outgoing on
• [803] - choose to print the speed dialing
• [805] - choose account code report to be code or index.
• [806] - choose English language reporting
• move the programming switch to the original position
  



KX-TD and KX-TA Series (older ones)

• The programming switch is located on the PBX unit - open the cover and you'll find it and move it to programming mode.
• [23] - Duration time count star mode: instantly (can be configured in the software)
• [24] - SMDR Communication Parameters: CR+LF, 1200 bps, 7 bits, mark parity, 1 stop bit, 66 lines per page, skip perforation 0.
• [26] - Outgoing: ON, Incoming: ON
• move the programming switch to the original position